Doosan Puma GT 2100M (2017) - CNC Turning center - Romania

The 2017 Doosan Puma GT 2100M is a used CNC turning center suitable for metalworking operations. Located in Romania, this machine boasts impressive capabilities with a 600 mm swing over bed and a 390 mm swing over carriage. The maximum permissible turning diameter is 300 mm, and the recommended diameter is 210 mm. The maximum working length is 513 mm, ideal for handling long workpieces.

This model offers a 210 mm chuck size and is powered by a motor with a power output of 18.5 kW for short-duration operations and 15 kW for continuous operation. The spindle can reach speeds of up to 4500 rpm. The bar capacity is 65 mm.

The carriage has a travel of 230 mm on the X-axis and 580 mm on the Z-axis, with rapid traverse speeds of 24 m/min and 30 m/min, respectively. The positioning accuracy is 0.01 mm on the X axis and 0.02 mm on the Z axis, making it suitable for precision operations.

Location: Romania

The machine is available immediately, subject to prior sale.

The technical information provided is for guidance only. The measurements and capacities indicated are approximate and may differ slightly from the actual values ​​depending on the equipment and its configurations.